Description

The lighting stand LM2x150C from the Partnersite range is intended for building site illumination.

The product is dedicated for construction companies that need to light a building site for a long time.

The structure is durable and robust.

Savings

• The device uses only 300W by emitting a stream of light comparable to illumination of metal halide floodlights with a power of 800W.


• The use of shock-resistant LLS 150A floodlights using LED SMD technology guarantees stable work for many years. We avoid costs related to replacing light sources (bulbs for metal halide floodlights) on average every 8 thousand hours of operation.


• Average savings resulting from the use of Partnersite floodlights are the following: 2 illuminators x 20 EUR cost of one 400W source of light x 6 replacements = 240 EUR


• The cost of power consumption savings using two Partnersite floodlights LLS 150A is: 2 floodlights x 50,000h hours of operation X (0.400W-0.150W difference in power consumption) x 0,12 EUR the cost of one KWh= 300 EUR

Advantages of the product

• A simple system of setting up and folding the stand. Self-locking nuts were used.


• Handles for lifting the main beam by two persons.


• Stand legs have an anchoring hole.


• Illuminators are placed in an aluminium housing, which at the same time fulfils the function of a radiator moving away the heat. The illuminator housing has the level of impermeability of IP 65, which makes it possible to use the floodlight both indoors and outdoors without the risk of solids and water getting inside the housing.


• Floodlights have a broad field of LED distribution offering very advantageous lighting properties, which are much more efficient than the central LED arrangement with a reflector. Such an LED system decreases the impression of dazzling and ensures better light distribution, thanks to which the room or area are evenly lit within the full range of the lighting angle.

Conditions of use on a stable surface

• The device can be used safely with full anchoring in wind that does not exceed 14 m/s.


• The device can be used safely with full anchoring and guy wires in wind that does not exceed 18 m/s.


• The device can be used safely without anchoring in wind that does not exceed 6 m/s.

Conditions of use on a soft surface

• The main beam is set on the surface; the side legs stabilize the stand.

All materials are coated with anticorrosive paint or galvanized to prevent corrosion.

A connection cable was used with a sealed angular plug with a double set of protective contacts H05RR-F 3x1.0 (rubber).